View F1778410K2FCB0_7653234.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 1 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 interference suppression film capacitor - class x2 radial mkp 310 v ac - standard across the line features ? 7.5 mm to 27.5 mm lead pitch ? self-healing properties ? for temperature up to 110 c ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications for standard across the line x2 applications. see also application note: www.vishay.com/doc?28153 notes ?for more detailed data and test requirements, contact rfi@vishay.com quick reference data capacitance rang e (e12 series) 0.001 f to 4.7 f (preferred values acc. to e6) capacitance tole rance 20 %; 10 %; ( 5 % on request) rated ac voltage 310 v ac ; 50 hz to 60 hz permissible dc voltage 800 v dc at 85 c 630 v dc at 110 c climatic testing class according to iec 60068-1 55/110/56/b for volumes > 1750 mm 3 55/110/56/c for volumes ? 1750 mm 3 maximum application temperature c ? 470 nf: 110 c (125 c for less than 1000 h) c > 470 nf: 110 c reference standards iec 60384-14 and en 60384-14 iec 60065, pass. flamm. class b for volumes > 1750 mm 3 csa-e384-14; cqc ul 60384-14 dielectric polypropylene film electrodes metallized film construction mono construction encapsulation plastic case, epoxy resin sealed, flame retardant class ul 94 v-0 leads tinned wire marking c-value; tolerance; rated voltage; sub-class; manufacturers type; code for dielectric material; manufacturer location, year and week; manufacturers logo or name; safety approvals dimensions in millimeters w ? d t l p h l t
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 2 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number the new rfi film capacitor code is made up 14 digit code (example) notes (1) for detailed tape specification refer to packaging information: www.vishay.com/doc?28139 (2) packaging will be bulk for all capacitors with pitch ? 15 mm and such with long leads (> 5 mm). ? capacitors with short lead s up to 5 mm and pitch > 15 mm will be in tray and asking code will be t. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 f 1778 410 m 2 f c b 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 (pos.) f 1 7 7 8 4 1 0 m 2 f c b 0 capacitance series capacitance value expressed in pf capacitance tolerance rated voltage or special versions pitch design (lead configuration) pos. 12/13/14 pos. 1 to 5 pos. 6/7/8 pos. 9 pos. 10 pos. 11 pos. 12 pos. 13 pos. 14 represent significant figures pos. 6 specifies multiplier (in 10) e.g.: 0.01 f = 310 0.1 f = 410 1.0 f = 510 e.g. 0 (zero) = spaceholder m = 20 % k = 10 % j = 5 % specials: a = + 10 %/- 0 % b = + 5 %/+ 15 % p = + 0 %/- 15 % r = + 10 %/- 5 % u = + 10 %/+ 20 % e.g. 0 (zero) = spaceholder 2 = 310 v ac 3 = 310 v ac e.g. 0 (zero) = spaceholder c = 7.5 mm d = 10.0 mm f = 15.0 mm i = 22.5 mm k = 27.5 mm e.g. 0 (zero) = spaceholder s = 3.5 - 0.5 mm p = 3.5 0.3 mm b = 4 - 1 mm m = 5 - 1 mm c = 6 - 1 mm e = 10 - 1 mm t = 11 - 1 mm d = 15 - 1 mm f = 19 - 1 mm h = 20 + 5 mm l = 30 + 5 mm k = 40 + 5 mm n = 45 - 2 mm other = special version packaging of specialities 0 (zero) = spaceholder b = bulk/loose m = magazine t = tray/pallet (2) u = tape and reel (1) (h: 16.5 mm, ? 350 mm) r = tape and reel (1) (h: 16.5 mm, ? 500 mm) v = tape and reel (1) (h: 18.5 mm, ? 350 mm) w = tape and reel (1) (h: 18.5 mm, ? 500 mm) g = ammopack (1) (h: 18.5 mm) z = leaded wound element (unencapsulated) other = special version special internal code 0 (zero) = spaceholder r = discharging resistor c = deal with coc other = special version capacitance series multiplier and capacitance (numerically) capacitance tolerance voltages pitch design lead configuration position 12, 13, 14
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 3 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) see voltage proof test for metallized film capacitors: www.vishay.com/doc?28169 specific reference data description value rated ac voltage (u rac ) 310 v permissible dc voltage (u rdc ) 630 v tangent of loss angle: at 1 khz at 10 khz c ?? 470 nf ? 10 x 10 -4 ? 20 x 10 -4 470 nf ? c ?? 1 f ?? 20 x 10 -4 ?? 70 x 10 -4 c > 1 f ?? 30 x 10 -4 - rated voltage pulse slope (du/dt) r at 435 v dc pitch = 7.5 mm 600 v/s pitch = 10 mm 600 v/s pitch = 15 mm 400 v/s pitch = 22.5 mm 150 v/s pitch = 27.5 mm 100 v/s r between leads, for c ? 0.33 f at 100 v; 1 min ?? 15 000 m ? rc between leads, for c > 0.33 f at 100 v; 1 min > 5000 s r between leads and case; 100 v; 1 min ?? 30 000 m ? withstanding (dc) voltag e (cut off current 10 ma) (1) ; rise time 1000 ? v/s: c ? 1 f 2200 v; 1 min c > 1 f 1800 v; 1 min withstanding (ac) voltage betw een leads and case 2120 v; 1 min max. application temp erature for 0.001 f ? c ? 0.47 f 110 c (125 c less than 1000 h) max. application temperature for c > 0.47 f 110 c electrical data and ordering code u rac (v) cap. f pos. 6 to 8 tolerance code pos. 9 j = 5 % k = 10 % m = 20 % dimensions max. w x h x l (mm) mass (g) (3) spq (4) short leads (pieces) ordering code (2) type c-value tol. voltage pitch lead length design 1 to 5 6 to 8 9 10 11 12 to 14 (1) 310 pitch 7.5 mm 0.4 mm; d t = 0.50 mm 0.05 mm 0.0010 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 210 . . c . . 0 0.0012 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 212 k . c . . 0 0.0015 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 215 . . c . . 0 0.0018 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 218 k . c . . 0 0.0022 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 222 . . c . . 0 0.0027 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 227 k . c . . 0 0.0033 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 233 . . c . . 0 0.0039 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 239 k . c . . 0 0.0047 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 247 . . c . . 0 0.0056 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 256 k . c . . 0 0.0068 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 268 . . c . . 0 0.0082 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 282 k . c . . 0 0.010 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 310 . . c . . 0 0.012 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 312 k . c . . 0 0.015 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 315 . . c . . 0 0.018 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 318 k . c . . 0 0.022 k/m 4.0 x 9.0 x 10.0 0.45 1500 f1778 322 . . c . . 0 0.027 k 4.0 x 9.0 x 10.0 0.45 1500 f1778 327 k . c . . 0 0.033 k 5.0 x 10.5 x 10.0 0.6 1000 f1778 333 k . c . . 0 0.033 m 4.0 x 9.0 x 10.0 0.45 1500 f1778 333 m . c . . 0 0.039 k 5.0 x 10.5 x 10.0 0.6 1000 f1778 339 k . c . . 0 0.047 k 5.0 x 10.5 x 10.0 0.6 1000 f1778 347 k . c . . 0 0.047 m 5.0 x 10.5 x 10.0 0.4 1000 f1778 347 m . c . . 0 0.056 k 6.0 x 11.5 x 10.0 0.8 750 f1778 356 k . c . . 0 0.068 m 6.0 x 11.5 x 10.0 0.8 750 f1778 368 m . c . . 0
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 4 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 310 pitch 10 mm 0.4 mm; d t = 0.60 mm 0.06 mm 0.0010 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 210 . . d . . 0 0.0012 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 212 k . d . . 0 0.0015 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 215 . . d . . 0 0.0018 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 218 k . d . . 0 0.0022 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 222 . . d . . 0 0.0027 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 227 k . d . . 0 0.0033 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 233 . . d . . 0 0.0039 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 239 k . d . . 0 0.0047 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 247 . . d . . 0 0.0056 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 256 k . d . . 0 0.0068 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 268 . . d . . 0 0.0082 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 282 k . d . . 0 0.010 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 310 . . d . . 0 0.012 k 4.0 x 10.0 x 12.5 0.6 1500 f1778 312 k . d . . 0 0.015 k/m 4.0 x 10.0 x 12.5 0.6 1500 f1778 315 . . d . . 0 0.018 k 4.0 x 10.0 x 12.5 0.6 1250 f1778 318 k . d . . 0 0.022 k/m 4.0 x 10.0 x 12.5 0.6 1250 f1778 322 . . d . . 0 0.027 k 4.0 x 10.0 x 12.5 0.6 1250 f1778 327 k . d . . 0 0.033 k/m 4.0 x 10.0 x 12.5 0.6 1000 f1778 333 . . d . . 0 0.039 k 4.0 x 10.0 x 12.5 0.6 1000 f1778 339 k . d . . 0 0.047 k 4.0 x 10.0 x 12.5 0.6 750 f1778 347 k . d . . 0 0.047 m 4.0 x 10.0 x 12.5 0.6 1000 f1778 347 m . d . . 0 0.056 k 5.0 x 11.0 x 12.5 0.82 1000 f1778 356 k . d . . 0 0.068 k/m 5.0 x 11.0 x 12.5 0.82 750 f1778 368 . . d . . 0 0.082 k 6.0 x 12.0 x 12.5 1.10 750 f1778 382 k . d . . 0 0.100 k/m 6.0 x 12.0 x 12.5 1.10 750 f1778 410 . . d . . 0 pitch 15 mm 0.4 mm; d t = 0.60 mm 0.06 mm 0.010 k/m 5.0 x 11.0 x 17.5 1.0 750 f1778 310 . . f . . 0 0.012 k 5.0 x 11.0 x 17.5 1.0 750 f1778 312 k . f . . 0 0.015 k/m 5.0 x 11.0 x 17.5 1.0 750 f1778 315 . . f . . 0 0.018 k 5.0 x 11.0 x 17.5 1.0 750 f1778 318 k . f . . 0 0.022 k/m 5.0 x 11.0 x 17.5 1.0 750 f1778 322 . . f . . 0 0.027 k 5.0 x 11.0 x 17.5 1.0 750 f1778 327 k . f . . 0 0.033 k/m 5.0 x 11.0 x 17.5 1.0 750 f1778 333 . . f . . 0 0.039 k 5.0 x 11.0 x 17.5 1.0 750 f1778 339 k . f . . 0 0.047 k/m 5.0 x 11.0 x 17.5 1.0 750 f1778 347 . . f . . 0 0.056 k 5.0 x 11.0 x 17.5 1.0 750 f1778 356 k . f . . 0 0.068 k/m 5.0 x 11.0 x 17.5 1.0 750 f1778 368 . . f . . 0 0.082 k 5.0 x 11.0 x 17.5 1.0 750 f1778 382 k . f . . 0 0.10 k 5.0 x 11.0 x 17.5 1.0 600 f1778 410 k . f . . 0 0.10 m 5.0 x 11.0 x 17.5 1.0 750 f1778 410 m . f . . 0 0.12 k 6.0 x 12.0 x 17.5 1.4 600 f1778 412 k . f . . 0 0.15 k 6.0 x 12.0 x 17.5 1.4 450 f1778 415 k . f . . 0 0.15 m 6.0 x 12.0 x 17.5 1.4 600 f1778 415 m . f . . 0 pitch 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm 0.18 k 7.0 x 13.5 x 17.5 1.8 450 f1778 418 k . f . . 0 0.22 k/m 7.0 x 13.5 x 17.5 1.8 300 f1778 422 . . f . . 0 0.27 k 8.5 x 15.0 x 17.5 2.4 240 f1778 427 k . f . . 0 0.33 k/m 8.5 x 15.0 x 17.5 2.4 240 f1778 433 . . f . . 0 0.39 k 10.0 x 16.5 x 17.5 3 225 f1778 439 k . f . . 0 0.47 k/m 10.0 x 16.5 x 17.5 3 225 f1778 447 . . f . . 0 0.56 k/m 10.0 x 18.5 x 18.0 4.3 225 f1778 456 . . f . . 0 0.68 m 11.0 x 18.5 x 18.0 5.5 225 f1778 468 m . f . . 0 electrical data and ordering code u rac (v) cap. f pos. 6 to 8 tolerance code pos. 9 j = 5 % k = 10 % m = 20 % dimensions max. w x h x l (mm) mass (g) (3) spq (4) short leads (pieces) ordering code (2) type c-value tol. voltage pitch lead length design 1 to 5 6 to 8 9 10 11 12 to 14 (1)
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 5 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? spq = standard packing quantity ? for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 (1) for further packaging see table composition of catalog number (2) further information about packaging quantities with different lead length and/or tape d versions, see docume nt packing quantiti es www.vishay.com/doc?27608 (3) weight for short lead product only 310 pitch 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm 0.12 k 6.0 x 15.5 x 26.0 2.4 260 f1778 412 k . i . . 0 0.15 k/m 6.0 x 15.5 x 26.0 2.4 260 f1778 415 . . i . . 0 0.18 k 6.0 x 15.5 x 26.0 2.4 260 f1778 418 k . i . . 0 0.22 k/m 6.0 x 15.5 x 26.0 2.4 260 f1778 422 . . i . . 0 0.27 k 6.0 x 15.5 x 26.0 2.4 200 f1778 427 k . i . . 0 0.33 k 6.0 x 15.5 x 26.0 2.4 190 f1778 433 k . i . . 0 0.33 m 6.0 x 15.5 x 26.0 2.4 235 f1778 433 m . i . . 0 0.39 k 7.0 x 16.5 x 26.0 2.9 200 f1778 439 k . i . . 0 0.47 k 7.0 x 16.5 x 26.0 2.9 190 f1778 447 k . i . . 0 0.47 m 7.0 x 16.5 x 26.0 2.9 200 f1778 447 m . i . . 0 0.56 k 8.5 x 18.0 x 26.0 3.8 150 f1778 456 k . i . . 0 0.68 k 10.0 x 19.5 x 26.0 6.8 150 f1778 468 k . i . . 0 0.68 m 8.5 x 18.0 x 26.0 3.8 170 f1778 468 m . i . . 0 0.82 k 10.0 x 19.5 x 26.0 6.8 200 f1778 482 k . i . . 0 1.0 k 12.0 x 22.0 x 26.0 7.8 150 f1778 510 k . i . . 0 1.0 m 10.0 x 19.5 x 26.0 6.8 135 f1778 510 m . i . . 0 1.5 m 12.5 x 22.5 x 26.5 10 140 f1778 515 m . i . . 0 pitch 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm 0.47 k/m 9.0 x 19.0 x 31.5 5.5 160 f1778 447 . . k . . 0 0.56 k 9.0 x 19.0 x 31.5 5.5 160 f1778 456 k . k . . 0 0.68 k/m 9.0 x 19.0 x 31.5 5.5 160 f1778 468 . . k . . 0 0.82 k 11.0 x 21.0 x 31.0 7.4 125 f1778 482 k . k . . 0 1.0 k/m 11.0 x 21.0 x 31.0 7.4 125 f1778 510 . . k . . 0 1.2 k 11.0 x 21.0 x 31.0 7.4 110 f1778 512 k . k . . 0 1.5 k/m 13.0 x 23.0 x 31.0 9.2 110 f1778 515 . . k . . 0 1.8 k 15.0 x 25.0 x 31.5 12.3 85 f1778 518 k . k . . 0 2.2 k/m 15.0 x 25.0 x 31.5 12.3 85 f1778 522 . . k . . 0 2.7 k 18.0 x 28.0 x 31.5 16.1 100 f1778 527 k . k . . 0 3.3 k 21.0 x 31.0 x 31.0 20.3 70 f1778 533 k . k . . 0 3.3 m 18.0 x 28.0 x 31.5 16.1 80 f1778 533 m . k . . 0 3.9 k 21.0 x 31.0 x 31.0 20.3 50 f1778 539 k . k . . 0 4.7 m 21.0 x 31.0 x 31.0 20.3 50 f1778 547 m . k . . 0 electrical data and ordering code u rac (v) cap. f pos. 6 to 8 tolerance code pos. 9 j = 5 % k = 10 % m = 20 % dimensions max. w x h x l (mm) mass (g) (3) spq (4) short leads (pieces) ordering code (2) type c-value tol. voltage pitch lead length design 1 to 5 6 to 8 9 10 11 12 to 14 (1)
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 6 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting normal use the capacitors are designed for mounting on printed-circuit boards. the capacitors packed in bandoliers are designed for mounting in printed circuit boards by means of automatic insertion machines. for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 specific method of mounting to withstand vibrat ion and shock in order to withstand vibration and shock tests, it must be ensured that the stand-off pi ps are in good contact with the printed-circuit board: ? for pitches ? 15 mm capacitors shall be mech anically fixed by the leads ? for larger pitches the capacitors shall be mounted in the same wa y and the body clamped in addition space requirements on printed circuit-board the maximum space for length (i max. ), width (w max. ), and height (h max. ) of film capacitors to take in account on the printed circuit board is shown in the drawings: ? for products with pitch ? 15 mm, ? w x ? l = 0.3 mm and ? h = 0.1 mm ? for products with 15 mm < pitch ? 27.5 mm, ? w x ? l = 0.5 mm and ? h = 0.1 mm ? for products with pitch = 37.5 mm, ? w x ? l = 0.7 mm and ? h = 0.5 mm eccentricity defined as in drawing. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. approvals safety approvals x2 voltage value file numbers links en 60384-14 (enec) (= iec 60384-14 ed-3 ) 310 v ac 1 nf to 4.7 f fi 2013003 www.vishay.com/doc?28179 ul 60384-14 310 v ac 1 nf to 4.7 f e354331 www.vishay.com/doc?28184 csa-e384-14 310 v ac 1 nf to 4.7 f e354331 cqc 310 v ac 1 nf to 4.7 f cqc08001026060 (f) cqc08001026061 (l) cb test certificate 310 v ac 1 nf to 4.7 f fi 7755 www.vishay.com/doc?28175 the enec-approval together with the cb-certificate replace all national marks of the following countries (they have already sig ned the enec-agreement): austria; belgium; czech re public; denmark; finland; france; germany; greece; hungary; ireland; italy; luxembou rg; netherlands; norway; portugal; slovenian; sp ain; sweden; switzerland and united kingdom. cba116 eccentricity w max. = w + h max. = h + i max. = i + seating plane
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 7 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 soldering conditions for general soldering conditions and wave solder ing profile, we refer to the application note: ? soldering guideline for film capacitors: www.vishay.com/doc?28171 storage temperature ?t stg = - 25 c to + 35 c with rh maximum 75 % without condensation ratings and characteristics reference conditions unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied ov er 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relati ve humidity not exceeding 20 %. characteristics capacitance as a function of ambient temperature (typical curve) impedance as a func tion of frequency (typical curve) tangent of loss angle as a function of frequency (typical curve) resonant frequency as a function of capacitance (typical curve) typical - 50 c/c (%) 2 - 2 - 4 - 6 0 t amb (c) 4 max. min. 050100 f (hz) 10 3 10 0 10 -1 10 2 10 1 10 -2 10 6 10 5 10 4 10 7 10 8 impedance (%) 4700 nf 10 nf 47 nf 100 nf 470 nf 1000 nf 4.7 nf 1 nf dissipation factor (x 10 -4 ) c 10 nf 10 nf < c 47 nf 10 3 10 2 10 1 10 0 10 1 10 2 10 3 10 4 10 5 f (hz) c > 1 f 220 nf < c 1 f 47 nf < c 220 nf 10 0 10 -1 10 2 10 1 f (mhz) c (nf) x2 1 10 100 1000 10 000
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 8 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 max. rms voltage as a function of frequency (typical curve) max. rms current as a function of frequency (typical curve) insulation resistance as a function of ambient temperature (typical curve) application notes ? for x2 electromagnetic interference suppression in standard across the line applications (50 hz/60 hz) with a maximum mains voltage of 310 v ac . ? for series impedance applications we refer to application note www.vishay.com/doc?28153 ? for capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. for information depending of the capacitance value an d the number of parallel connections contact: rfi@vishay.com ? these capacitors are not intended for continuous pulse applic ations. for these situations, capacitors of the ac and pulse programs must be used. ? the maximum ambient te mperature must not exceed 110 c (125 c for less than 1000 h) for c ? 470 nf and 110 c for c > 470 nf. ? rated voltage pulse slope: ? if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 v dc and divided by the applied voltage. 10 3 10 2 10 1 10 1 10 2 10 3 10 4 10 5 f (hz) t amb 110 c ac voltage (v) 10 3 10 4 10 0 10 -1 10 2 10 1 10 1 10 2 10 3 10 4 10 5 f (hz) 470 nf 100 nf 47 nf 10 nf 1000 nf 1 nf 4700 nf 4.7 nf t amb 110 c ac current (ma) 10 6 10 5 10 4 0 20 40 60 80 100 t amb (c) rc (s)
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 9 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 inspection requirements general notes sub-clause numbers of tests and performance requirements refer to the sectional spec ification, iec publication iec 60384-14 ed-3 and specific reference data. group c inspection requirements sub-clause number and test cond itions performance requirements sub-group c1a part of sample of sub-group c1 4.1 dimensions (detail) as specified in section general data of this specification ? initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz ? 4.3 robustness of terminatio ns tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 ? no visible damage 4.4 resistance to solder ing heat no pre-drying method: 1a solder bath: 280 c 5 c duration: 10 s ? 4.19 component solvent resistance isopropylalcohol at room temperature method: 2 immersion ti me: 5 min 0.5 min recovery time: min. 1 h, max. 2 h ? 4.4.2 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured initially. ? tangent of loss angle increase of tan ? : ? ? 0.008 for: c ? 1 f or ? ? 0.005 for: c > 1 f compared to values measured initially. ? insulation resistance as specified in section insulation resistance of this specification sub-group c1b part of sample of sub-group c1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz ? 4.20 solvent resistance of the marking isopropylalcohol at room temperature method: 1 rubbing material: cotton wool immersion time: 5 min 0.5 min ? no visible damage legible marking 4.6 rapid change of temperature ? a = - 55 c ? ? b = + 110 c ? 5 cycles ? duration t = 30 min ? 4.6.1 inspection visual examination no visible damage ? 4.7 vibration mounting: see section mounting of this specification procedure b4 frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 10 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c1b part of sample of sub-group c1 4.7.2 final inspection visual examination no visible damage ? 4.9 shock mounting: see sect ion mounting for more information pulse shape: half sine acceleration: 490 m/s2 duration of pulse: 11 ms ? 4.9.2 final measurements visual examination no visible damage ? capacitance | ? c/c| ? 5 % of the value measured initially. ? tangent of loss angle increase of tan ? : ? ?? 0.008 for: c ? 1 f or ? ? 0.005 for: c > 1 f compared to values measured initially. ? insulation resistance as specified in section insulation resistance of this specification sub-group c1 ? combined sample of specimens of sub-groups c1a and c1b 4.11 climatic sequence ? 4.11.1 initial measur ements capacitance measured in 4.4.2 and 4.9.2 tangent of loss angle: measured initially in c1a and c1b ? 4.11.2 dry heat temperature: 110 c ? 4.11.3 damp heat cyclic ? test db ? first cycle ? duration: 16 h 4.11.4 cold temperature: - 55 c ? 4.11.5 damp heat cyclic ? test db ? remaining cycles ? duration: 2 h 4.11.6 final measurements visual examination no visible damage ? legible marking ? capacitance | ? c/c| ? 5 % of the value measured in 4.11.1. ? tangent of loss angle increase of tan ? : ? ? 0.008 for: c ? 1 f or ? ? 0.005 for: c > 1 f compared to values measured in 4.11.1. ? voltage proof 1350 v dc ; 1 min between terminations ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub group c2 4.12 damp heat steady state 56 days; 40 c; 90 % to 95 % rh no load ? 4.12.1 initial measur ements capacitance tangent of loss angle: at 1 khz ? 4.12.3 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured in 4.12.1. group c inspection requirements sub-clause number and test cond itions performance requirements
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 11 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub group c2 4.12.3 final measurements tangent of loss angle increase of tan ? : ? ? 0.008 for: c ? 1 f or ? ? 0.005 for: c > 1 f compared to values measured in 4.12.1. ? voltage proof 1350 v dc ; 1 min between terminations ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub-group c3 4.13.1 initial measur ements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz ? 4.13 impulse voltage 3 successive impulses, full wave, peak voltage: x2: 2.5 kv for c ? 1 f x2: 2.5 kv/ ? c for c > 1 f max. 24 pulses ? no self healing, breakdowns or flash-over 4.14 endurance duration: 1000 h 1.25 x u rac at 110 c once in every hour the voltage is increased ? to 1000 v rms for 0.1 s via resistor of ? 47 ? 5 % ? 4.14.7 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 10 % compared to values measured in 4.13.1. ? tangent of loss angle increase of tan ? : ? ? 0.008 for: c ?? 1 f or ? ? 0.005 for: c > 1 f compared to values measured in 4.13.1. ? voltage proof ? 1350 v dc ; 1 min between terminations ? 2120 v ac ; 1 min between terminations ? and case ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub-group c4 4.15 charge and discharge 10 000 cycles ? charged to 435 v dc ? discharge resistance: ? ? ? ? 4.15.1 initial measur ements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz ? 4.15.3 final measur ements capacitance | ? c/c| ? 10 % compared to values measured in 4.15.1. ? tangent of loss angle increase of tan ? : ? ? 0.008 for: c ? 1 f or ? ? 0.005 for: c > 1 f compared to values measured in 4.15.1. ? insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements r 435 v dc 1.25 x c du/dt ?? ----------------------------------------------- =
f1778x2 www.vishay.com vishay roederstein revision: 13-dec-13 12 document number: 27610 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c5 4.16 radio frequency characte ristic resonance frequency ?? 0.9 times the value as specified in section resonant frequency of this specification. sub-group c6 4.17 passive flammability ? class b bore of gas jet: ? 0.5 mm fuel: butane test duration for actual volume v in mm 3 : v ? 250: 10 s 250 < v ? 500: 20 s 500 < v ? 1750: 30 s v > 1750: 60 s one flame application after removing test flam e from capacitor, the capacitor must not continue to burn for more than 10 s. no burning particle must drop from the sample. sub-group c7 4.18 active flammability 20 cycles of 2.5 kv di scharges on the test capacitor connected to u rac . the cheese cloth around the capacitors shall not burn with a flame. no electrical measurements are required. group c inspection requirements sub-clause number and test cond itions performance requirements 45.0 ~ 8 mm 12 mm
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of F1778410K2FCB0

	To Download F1778410K2FCB0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .